IP address is a class that is used by the router as a default gateway similar to Because this IP address has to be unique, there is only one device on the network can use It is often used when setting up a home network and some network routers also use it as their default address.

All of

When a device join a LAN (local area network), network will appear in the TCP port. It is part of a local connection when a wireless access point and internet access. The ping utility can be used if you want to know if a device on your network is using

How to set up your router to use

To set up your router to use, first you will have access to the admin panel of your router. Start by typing in the address bar of your browser. After you enter your username and password, go to the network menu. Next, enter the login details from your network provider. DNS and you should be. You should also take a moment to establish a method for reliable encryption. WPA or WPE is a great choice.

The problem may be with


Sometimes, when using, you may be assigned to the device address and a gateway device does not respond to the problem. A static IP address will solve old problems, while technical failure may be the cause of a gateway device does not respond. On the Wi-Fi network that the network name and set the IP address is assigned automatically, the customer does not properly address the transfer can also occur. Finally, corruption port settings can be caused by the installation automatically.

Like 192.168.l.l used by D-Link, Netgear router, the IP address is the choice of many of the broadband router. Popular makes SMC and Belkin included.

How to login using

The first step to log in to the console on-board on your router is to open your favorite browser. Once you’ve done that, click on the address bar and enter As long as you have entered the exact numbers (and you’re using the relevant implementation of the router), you will be prompted to enter your login information. Enter your username and password and you will be able to access the console. From here, you can make changes to the settings of your router include: WAN, LAN, WLAN, PPPoE, WPS, MAC, DSL, DCHP clients and various security options.

Limitations of “

Because it is a private IPv4 address of should limit is that you can only link to a router inside your network. If you want to run simultaneously two routers on your network, you must assign a separate address. By examining the default port, you can find the local router IP address used.

How to access

You can access the admin panel of your modem by opening your browser and type in the address bar. If you forget your password, the easiest way is to hold the reset button for 15 minutes to restore your router to make the default factory.

How to change

If you want to change the default address of your router, you should use the administration console, can be accessed by logging into your router is detailed above.

In one street, two houses can not have the same address. The IP address too, in a network can not have two computers with IP addresses. If two devices have the same IP address is plugged into the network, it will lead to conflict IP address (IP Conflict). Meanwhile, both devices will not work.

Currently, families often use Wifi emitters 2-3 to get the Wifi waves cover the entire space. Therefore, in the family can have up to 2-3 wifi network. That leads to the default address from the manufacturer can conflict with each other. However, you need not worry because now these devices are equipped with Wi-Fi feature that automatically reset the IP to a different address when conflicting.

Example: Tenda wifi device with an IP address default is If you plug in the network address range 192.168.0.x/24, it will automatically detect the conflict and pushed to the IP range of Similarly, if the network has range, it will jump to up range is an IP address usually set as the default login address with your ADSL modem, and it’s also used as default management address of some big brand routers. These router producer companies integrate management panel within routers so as to setup and configure routers very easily. You can login with this address to change routers’ settings such as configure WIFI settings and diagnose connection problems.

How to setup your router with
First, you need to login your router with, usually the username is ‘admin’, and sometimes router companies provide a second username for browsing all functions only. After you get the full authorization, you can access the management panel to setup many major functions, such as Router username and password management, Wireless network setup and configuration, Local network management and IP address arrangement, LAN, WAN, WLAN settings, ADSL setup, MAC setting, etc. Now the most popular setting part is wireless network setup, at the panel, you need to configure WIFI name, access code(WEP, WPA or WPA2), don’t forget to setup a complex password.